Surficial Materials Metadata

Description Attribute Tables Field Attributes

--------------------------------------------------------------------------------
Environmental and Geographic Information Center  Metadata File Name: surfmat.htm
Department of Environmental Protection
State of Connecticut                           Metadata File generated: 05/01/00
79 Elm Street
Hartford, Connecticut 06106                           Metadata Version: 05/01/00
--------------------------------------------------------------------------------

Description

Filename:

  Data Layer:       SURFMAT
  Layer Prefix:     SM

Citation:

  Title:            Surficial Materials
  Author:           Janet Radway Stone, John P. Schafer, Elizabeth Haley London,
                    and Woodrow B. Thompson
  Publication:      Surficial Materials Map of Connecticut, Scale 1:125,000
  Publication Date: 1992
  Publisher:        U.S Geological Survey
  Comments:         Surficial Materials Map of Connecticut available from Maps
                    And Publications, Natural Resources Center, DEP, State of
                    Connecticut or the U.S. Geological Survey.

Brief Description:

Map units describe textures of unconsolidated Glacial and Post Glacial Materials
including gravel, sand, fines, till, alluvium, and swamp deposits.

General Comments:

Data source is the Surficial Materials Map of Connecticut, Stone and others,
1992.  Map published at 1:125,000 scale.  Digitized from 1:24,000-scale compi-
lation sheets for the 1:125,000-scale Surficial Materials Map of Connecticut.

Time Period:

  Time Period of Content: 1992
  Time Period Reference:  Map publication date
  Status:                 Published and distributed
  Update Frequency:       None

Spatial Domain:

  Spatial Extent:          State of Connecticut
  West Bounding Longitude: -73.7500
  East Bounding Longitude: -71.7500
  North Bounding Latitude: 42.1250
  South Bounding Latitude: 40.8750

Data Quality:

  Map Scale:             1:24000
  Horizontal Accuracy:   Not specified
  Vertical Accuracy:     Not applicable
  Attribute Accuracy:    Refer to the metadata file named SURFMAT.ATD

Native Data Set Environment:

  Database          SURFMAT
  Database Path:    /gis14/data/dep/geology/
  Coverage/Layer:   SURFMAT
  Map Library:
  Library Layer:
  Library Section:
  Format:           ARC/INFO Coverage
  Precision:        Single
  Feature Types:    Line, Polygon

Primary Features:

  Arcs:             42292
  Polygons:         16921

Secondary Features:

  Arc Segments:     1515135
  Polygon Labels:   16793

Feature Tolerances:

  Fuzzy:            4.0000      Verified?  Y
  Dangle:           0.0000      Verified?  N

File size:

  Entire Layer:       30.00 MB
  Average Quad:        0.25 MB

Horizontal Coordinate System:

  State Plane Coordinate System of 1983, Zone 3526 (Connecticut)

  Horizontal Datum: North American Datum of 1983 (NAD 83)
  Map Projection:   Lambert Conformal Conic
  Spheriod:         GRS 80
  Map Scale:        1:24000
  Map Units:        Feet

Point of Contact:

  Contact:          Mary DiGiacomo-Cohen (LISRC), Janet Radway Stone, and
                    Margaret Thomas (DEP)
  Organization:     Long Island Sound Resource Center (LISRC)
  Mailing Address:  University of Connecticut, Avery Point
  Town:             Groton
  State:            Connecticut
  ZIP Code:         06340
  Country:          USA
  Telephone:        (860) 405-9015
  Facsimile:        (860) 449-8085
  Electronic Mail:
  Hours:            8:30-4:30, EST

Distribution:

  Contact:          Howie Sternberg
  Organization:     Natural Resources Center, DEP, State of Connecticut
  Mailing Address:  79 Elm Street
  Town:             Hartford
  State:            Connecticut
  ZIP Code:         06106-5127
  Country:          USA
  Telephone:        (860) 424-3594
  Facsimile:        (860) 424-4058
  Electronic Mail:  howard.sternberg@po.state.ct.us
  Hours:            8:30-4:30, EST

Internet Access:

  Site Name:        UCONN Map And Geographic Information Center (MAGIC)
  Site URL:         http://magic.lib.uconn.edu/

Abstract:

     The Surficial Materials data layer describes the unconsolidated glacial and
     postglacial deposits of Connecticut in terms of their grain-size
     distribution (texture) as compiled at 1:24,000 scale for the Surficial
     Materials Map of Connecticut (Stone, J.R., Schafer, J.P., London, E.H. and
     Thompson, W.B., 1992, U.S. Geological Survey special map, 2 sheets, scale
     1:125,000). Glacial meltwater deposits (stratified deposits) are
     particularly emphasized because these sediments are the major groundwater
     aquifers in the State and are also the major source of construction
     aggregate. These deposits are described in terms of their subsurface
     distribution of textures as well as their areal extent. The texture of
     meltwater deposits through their total vertical thickness in the subsurface
     is shown to the extent that it is known or can be inferred.  In some places
     only one textural unit (such as SG - SAND AND GRAVEL) describes the whole
     vertical extent of the meltwater deposits; in other places "stacked units"
     (such as SG/S/F - SAND AND GRAVEL overlying SAND overlying FINES) indicate
     changes of textural units in the subsurface.

     The list of map units below gives only a brief identification of the map
     units. For a complete description of the map units refer to the
     Supplemental Information section in this document. Further additional
     information concerning the thickness, mode of occurrence and mapping
     techniques for these deposits, it is beneficial to refer to the published
     map.

                              POSTGLACIAL DEPOSITS

     A    FLOODPLAIN ALLUVIUM--Sand, gravel, silt, and some organic material, on
          the floodplains of modern streams.

     SW   SWAMP DEPOSITS--Muck and peat that contain minor amounts of sand,
          silt, and clay, accumulated in poorly drained areas.

     SM   SALT-MARSH AND ESTUARINE DEPOSITS--Peat and muck interbedded with sand
          and silt, deposited in environments of low wave energy along the coast
          and in river estuaries.

     TA   TALUS--Loose, angular blocks (mostly boulders) accumulated by rockfall
          at the bases of steep bedrock cliffs.

     B    COASTAL BEACH AND DUNE DEPOSITS--Sand and gravel deposited along the
          shoreline by waves and currents and by wind action.

     AF   ARTIFICIAL FILL--Earth materials and manmade materials that have been
          artificially emplaced.

                            GLACIAL ICE-LAID DEPOSITS

     TILL DEPOSITS--poorly sorted, generally nonstratified mixture of
     grain-sizes ranging from clay to large boulders; the matrix of most tills
     is composed dominantly of sand and silt.

     T    THIN TILL--areas where till is generally less than 10-15 ft thick and
          including areas of bedrock outcrop where till is absent.

     TT   THICK TILL--areas where till is greater than 10-15 ft thick and
          including drumlins in which till thickness commonly exceeds 100 ft
          (maximum recorded thickness is about 200 ft).

     TS   END MORAINE DEPOSITS--Composed variably of sandy upper till and
          stratified sand and gravel.  Dense concentrations of surface boulders
          are present in some places.  These deposits occur in narrow zones that
          trend east-northeast, deposited along active ice margins, and are
          found principally in southeast Connecticut.

                           GLACIAL MELTWATER DEPOSITS

     All sorted and stratified sediments composed of gravel, sand, silt, and
     clay laid down by flowing meltwater during retreat of the last ice sheet;
     and including minor lenses of flowtill and other diamict sediment.

     G    GRAVEL--Composed mainly of gravel-sized particles; cobbles and
          boulders predominate; lesser amounts of sand within the gravel matrix
          and as separate layers.

     SG   SAND AND GRAVEL--Composed of mixtures of gravel and sand within
          individual layers and as alternating layers.  Sand and gravel layers
          generally range from 25 to 50 percent gravel particles and from 50 to
          75 percent sand particles.

     S    SAND--Composed mainly of very coarse to fine sand, commonly in
          well-sorted layers.  Coarser layers may contain up to 25 percent
          gravel particles (generally granules and pebbles); finer layers may
          contain some very fine sand, silt, and clay.

     F    VERY FINE SAND, SILT, AND CLAY (FINES)--Composed of well-sorted, thin
          layers of alternating silt and clay, or thicker layers of very fine
          sand and silt.

                                  STACKED UNITS

     Stacked units consist of combinations of up to four of the above described
     units, such as:

     A/SG/S/F  ALLUVIUM overlying SAND AND GRAVEL overlying SAND overlying FINES

Descriptors:

     Geology, Glacial, Post-glacial, Unconsolidated materials, Texture, Grain-
     size, Meltwater deposition, Morphosequence, Stratified Drift, Till,
     Quaternary

Purpose:

     Surficial Materials (SURFMAT) is intended to serve as a geologic data layer
     for the Connecticut Department of Environmental Protection GIS.

     SURFMAT is compatible for use with other 1:24,000 scale data layers.
     Coincident hydrography arcs were taken from HYDROM; coincident political
     boundaries from TOWNM.

Intended use of data:

     Geologic and environmental mapping and analysis.

     Hard copy map production at scales from 1:12,000 to 1:500,000

     Spatial analysis with other 1:24,000 scale data layers

Supplemental Information:

     Digital Automation -

     Surficial materials digital data produced by the CT Dept. of Environmental
     Protection with support from the U.S. Geological Survey, the U.S.
     Environmental Protection Agency, and the CT Department of Public Health and
     Addiction Services.  Original mapping at 1:24,000 scale by the U.S.
     Geological Survey in cooperation with the Connecticut Department of
     Environmental Protection, Geological and Natural History Survey.  Data
     manually digitized from 1:24,000-scale mylar quadrangle compilation sheets
     (on file at the Natural Resources Center, DEP) prepared for the Surficial
     Materials Map of Connecticut, 1:125,000 scale, Stone and others, 1992.
     Topographic bases used in the original geologic compilation from USGS
     1:24,000 scale revisions 1952-1970.

     Digital compilation utilized hydrography from 7.5 minute, 1:24,000 scale
     U.S. Geological Survey Digital Line Graph source material (1969-1984)  with
     minor modification of geologic contacts to fit the revised hydrography
     where necessary. Hydrography selected from the USGS Digital Line Graph data
     (code numbers  050 0412,050 0421, and 050 0116) include streams, lakes,
     ponds, bays, estuaries, and seas with areas greater than 5 acres.

     Units shown on the quadrangle maps are typically those of the
     1:125,000-scale State Map. Additional map units may be present in the
     digital data that could not be readily shown on the published map at
     1:125,000 scale or that represent more recent mapping, particularly along
     the coast. Some subsurface information as noted by stacked units may also
     be more detailed in the digital data than that of the published State Map.

     Quadrangle Edge matching -

     Edge matching was performed in a way consistent with other DEP GIS data
     layers. Arcs crossing quadrangle boundaries were individually edge matched
     and visually checked for accuracy.  Beginning with quadrangle 1 in the
     Northwest corner of Connecticut, features were edge matched to line up with
     corresponding features on adjacent quadrangles through a process of
     checkerboard edge matching.  Every other quadrangle was adjusted such that
     arcs were snapped to connect with the corresponding stationary features on
     adjacent quadrangles.  Edge matching was successfully completed once it was
     possible to append the individual quadrangle coverages and assemble a
     statewide coverage with polygons that closed.

     Polygon Attributes -

     The Surficial Materials Polygon Code (SMPOLY_CD) represents the underlying
     classification scheme for surficial material polygons. SMPOLY_CD values are
     listed in the SMPOLY.COD table.  Based on SMPOLY_CD, AV_LEGEND was
     developed to easily classify and symbolize surficial material map units in
     ArcView.  An associated ArcView legend file (SURFMAT.AVL) may be loaded to
     automatically incorporate symbology in ArcView.  ACREAGE and AREA_SQMI
     values represent polygon AREA in acres and square miles, respectively.
     These values are based on that of AREA, which is computed by ARC/INFO and
     stored in units of square feet.  DXF-LAYER is a redefined field, based on
     SMPOLY_CD, that is referenced when converting from ARC/INFO to Drawing
     Exchange File (DXF) format.

     Arc Attributes -

     The Surficial Materials Arc Code (SMARC_CD) describes whether arcs
     represent true contacts between different surfical material units or
     shoreline features from hydrography.  SMARC_CD values are listed in the
     SMARC.COD table. DXF-LAYER is a redefined field, based on SMARC_CD, that is
     referenced when converting from ARC/INFO to Drawing Exchange File (DXF)
     format.

     Map Library -

     The final statewide coverage was inserted into the Quadrangle Map Library
     (QLIB), which tiled and stored the data by quadrangle.

     Geologic Discussion -

     The following text is excerpted from the text on sheet 1 of the Surficial
     Materials Map of Connecticut. It has been modified as necessary for use
     with the 1:24,000 scale digital data, and is not considered a valid
     substitute for the information found on the published map. For a more
     complete understanding of the geologic principles behind the Surficial
     Materials data it is advisable to consult the published map which contains
     cross sections, diagrams and text not available in digital form.

                        DISCUSSION OF SURFICIAL MATERIALS

     The unconsolidated deposits overlying bedrock in Connecticut range from a
     few feet to several hundred feet in thickness. These earth materials
     significantly affect human development of the land. Most of the
     unconsolidated materials are deposits of continental glaciers that covered
     all of New England at least twice during the Pleistocene ice age. These
     glacial deposits are divided into two broad categories, glacial till and
     glacial stratified deposits. Till, the most widespread glacial deposit, was
     laid down directly by glacier ice and is characterized by a nonsorted
     matrix of sand, silt, and clay with variable amounts of stones and large
     boulders. Glacial meltwater deposits are concentrated in both small and
     large valleys and were laid down by glacial meltwater in streams and lakes
     in front of the retreating ice margin during deglaciation. These deposits
     are characterized by layers of well-sorted to poorly sorted gravel, sand,
     silt, and clay. Postglacial sediments, primarily floodplain alluvium and
     swamp deposits, make up a lesser proportion of the unconsolidated materials
     of Connecticut. Alluvium is largely reworked from glacial materials and has
     similar physical characteristics.

     The distribution of surficial (unconsolidated) materials that lie between
     the land surface (below the pedogenic soil) and the bedrock surface is
     shown on this map to the extent that it is known or can be inferred. The
     cross sections and the block diagram  shown on the published map (Stone and
     others, 1992) illustrate the characteristic vertical distribution of
     glacial till, glacial meltwater deposits, and postglacial deposits
     encountered in Connecticut. The areal distribution of till and stratified
     deposits is related to the physiographic regions of the State: the eastern
     and western highlands and the central lowland. In highland areas, till is
     the major unconsolidated material, present as a discontinuous mantle of
     variable thickness over the bedrock surface. Till is thickest in drumlins
     and on the northwest slopes of hills. Glacial meltwater deposits that
     average 10-40 feet in thickness overlie the till in small upland valleys
     and commonly in north-sloping pockets between bedrock hills. In the central
     lowland, especially in the north half, glacial stratified deposits are the
     predominant surficial materials. These deposits generally overlie till;
     however, well logs indicate that in some places till is not present and the
     stratified deposits lie directly on bedrock. The extensive stratified
     deposits of the central lowland average 50-100 feet in thickness, and in
     the northern part they almost completely mask the till-draped bedrock
     surface. Postglacial materials locally overlie the glacial deposits
     throughout the State. Alluvium occurs on the floodplains of most streams
     and rivers. Swamp deposits occur in poorly drained areas. Talus occurs
     along the bases of steep bedrock cliffs, principally along the traprock
     ridges within the central lowland. Salt-marsh and estuarine deposits occur
     mainly along the tidal portions of streams and rivers entering Long Island
     Sound. Beach deposits occur along the shoreline of Long Island Sound.

     The units on this map delineate textural changes in the subsurface as well
     as areally at the surface. An earlier map at 1:125,000 scale of central
     Connecticut (Stone and others, 1979) shows only surface textural units; a
     separate map in the same series (Langer, 1979) shows subsurface deposits of
     fine-grained materials. Several previous 1:24,000-scale quadrangle maps in
     Connecticut show three-dimensional textural units and refer to them as
     "superposed deposits" (see Stone, 1976 and Radway and Schnabel, 1976, as
     examples). On this map, the term "stack unit" (Kempton, 1981) is used in
     place of superposed deposits.

             DISTRIBUTION OF TEXTURES IN GLACIAL MELTWATER DEPOSITS

     The distribution of textural units is extrapolated from both point data
     (well and test-hole logs, gravel pits, and shovel holes) and from
     interpretation of landforms based on the principles of morphosequence
     deposition and systematic northward ice retreat (Koteff, 1974; Koteff and
     Pessl, 1981). These concepts provide a model by which grain-size
     distribution can be predicted from the morphology of a deposit, given
     primary data about the textures at specific points. A morphosequence is a
     package of sediments deposited contemporaneously by meltwater flowing from
     the glacier margin to a specific base level. Within a morphosequence, grain
     size decreases and sorting improves from the ice-marginal (proximal) end of
     a deposit downstream to the distal end. Landforms are transitional within a
     sequence as well, ranging from ice-contact forms (eskers, kettles, kames)
     at the head (proximal end) of a deposit to uncollapsed forms (delta-foreset
     slopes, lake-bottom plains, valley trains) downstream (distal end). Coarser
     grained sediments are associated with the proximal parts of
     morphosequences, finer grained sediments are associated with distal parts;
     given this principle, textural distribution can be mapped using point data
     that serve as controls.

     The relationship between textural variations and morphosequences is
     illustrated by a cross section on the published map, which shows the
     distribution of texture units in the northern Quinnipiac River valley. This
     north-south section transects seven chronologically numbered
     morphosequences. Dashed lines drawn to the six southern sequences represent
     the probable generalized surface gradients of the heads of these deposits,
     prior to collapse (due to melting of buried ice) and subsequent stream
     entrenchment. From north to south within each of these sequences, the
     textures grade from coarse- to fine-grained sediments and the topography
     changes from collapsed to non-collapsed landforms. The longitudinal and
     vertical relationships illustrated by this section are common in other
     valleys as well.

     Stack units similar to those on the section described above occur
     throughout the stratified deposits of Connecticut. Many deposits having
     similar superposition of materials of differing texture were produced by
     geologic processes that occurred repeatedly in time and space during the
     deglaciation of Connecticut. For example, the SG/S/F and S/F stack units
     commonly occur in glacial-lake deltas. The SG/F stack unit commonly results
     from fluvial meltwater (or postglacial stream) terrace deposition on
     slightly older lake bottom deposits. The F/SG and S/SG units commonly occur
     in the distal parts of morphosequences where the sand or fines overlap the
     collapsed, coarser, proximal parts of other (older) sequences. Many basic
     texture units (G, SG, S, F) likewise have broadly common origins. Units of
     gravel or sand and gravel often occur in the proximal parts of deposits, or
     were commonly laid down in glaciofluvial environments. Units of sand and
     fine-grained sediment are typically associated with distal parts of
     sequences and were usually laid down in lacustrine environments.

                             THICKNESS OF MATERIALS

     The thickness of surficial materials in Connecticut varies considerably
     because of such factors as the high relief of the bedrock surface, changing
     conditions of deposition during deglaciation, and various effects of
     postglacial erosion and removal of glacial sediments. For more information
     on the thickness of deposits and the point data used to determine stacked
     units, it is beneficial to review the complete and figures on the published
     map.

                                   REFERENCES

     Deane, R.E., 1967, The surficial geology of the Hartford South  quadrangle,
          with map: Connecticut Geological and Natural History Survey Quadrangle
          Report 20, 43 p.
     Haeni, F.P., and Anderson, H.R., 1980, Hydrogeologic data for south-central
          Connecticut: Connecticut Water Resources Bulletin 32,43 p.
     Kempton, J.P., 1981, Three-dimensional geologic mapping for environmental
          studies in Illinois: Illinois Geological Survey Environmental Geology
          Note 100, 43 p.
     Koteff, Carl, 1974, The morphologic sequence concept and deglaciation of
          southern New England, in Coates, D.R., ed., Glacial geomorphology:
          Binghamton, N.Y., State University of New York, Publications in
          Geomorphology, p. 121-144.
     Koteff, Carl, and Pessl, Fred, Jr., 1981, Systematic ice retreat in New
          England: U.S. Geological Survey Professional Paper 1179, 20 p.
     Langer, W.H., 1979, Map showing distribution and thickness of the principal
          fine-grained deposits, Connecticut Valley urban area, central New
          England: U.S. Geological Survey Miscellaneous Investigations Series
          Map I-1074-C, scale 1:125,000.
     Mazzaferro, D.L., 1973, Hydrogeologic data for the Quinnipiac River basin,
          Connecticut: Connecticut Water Resources Bulletin 26, 54 p.
     Pessl, Fred, Jr., and Schafer, J.P., 1968, Two-till problem in
          Naugatuck-Torrington area, western Connecticut, in Orville, P.M., ed.,
          New England Intercollegiate Geological Conference 60th Annual Meeting,
          New Haven, Conn., Oct. 25-27, 1968, Guidebook for fieldtrips in
          Connecticut: Connecticut Geological and Natural History Survey
          Guidebook 2, Trip B-1, 25 p.
     Radway, J.A., and Schnabel, R.W., 1976, Map showing unconsolidated
          materials, Avon quadrangle, Connecticut: U.S. Geological Survey
          Miscellaneous Field Studies Map MF-514-C, scale 1:24,000.
     Ryder, R.B., and Weiss, L.A., 1971, Hydrogeologic data for the Upper
          Connecticut River basin, Connecticut: Connecticut Water Resources
          Bulletin 26, 54 p.
     Stone, J.R., 1976, Map showing unconsolidated materials, Windsor Locks
          quadrangle, Connecticut: U.S. Geological Survey Miscellaneous Field
          Studies Map MF-450-E, scale 1:24,000.
     Stone, J.R., London, E.H., and Langer, W.H., 1979, Map showing textures of
          unconsolidated materials, Connecticut Valley urban area, central New
          England: U.S. Geological Survey Miscellaneous Investigations Series
          Map I-1074-B, scale 1:125,000.
     Wentworth, C.K. 1922, A scale of grade and class terms for clastic
          sediments: Journal of Geology, v. 30, p. 377-392.

                            DESCRIPTION OF MAP UNITS

                            GLACIAL ICE-LAID DEPOSITS

     Glacial ice-laid deposits (tills) consist of nonsorted, generally
     nonstratified mixtures of grain-sizes ranging from clay to large boulders.
     The matrix of most tills is composed dominantly of sand and silt. Boulders
     within and on the surface of tills range from sparse to abundant. Some
     tills contain lenses of sorted sand and gravel and, less commonly, masses
     of laminated fine-grained sediments. The color and lithology of till vary
     across Connecticut, but generally reflect the composition of the local
     underlying and northerly adjacent bedrock from which the till was derived.
     Till blankets the bedrock surface in variable thickness, ranging from 0 to
     about 200 ft, and commonly underlies stratified meltwater deposits. Tills
     deposited during two separate glaciations occur in superposition within
     Connecticut (Pessl and Schafer, 1968). The upper till was deposited during
     the last (late Wisconsinan) glaciation; it is the most extensive till and
     is commonly observed in surface exposures, especially in areas where till
     thickness is less than 15 ft; it is described in the thin till unit
     description below. The lower till or "old" till was deposited during an
     earlier glaciation (probably Illinoian). The lower till has a more patchy
     distribution; it is principally a subsurface deposit, generally overlain by
     upper till, and therefore not shown as a separate map unit; the lower till
     does however constitute the bulk of material in the areas where till
     thickness is greater than 15 ft; it is described in the thick till unit
     description below. In all two-till exposures, the base of the upper till
     truncates the weathered surface of the old till. The lower part of the
     upper till commonly displays a zone of shearing, dislocation, and
     brecciation in which clasts of lower till are mixed and incorporated into
     the upper till.

     End moraine deposits occur principally in southeastern Connecticut. These
     deposits were laid down by ablation processes along active ice margins
     during retreat of the last (late-Wisconsinan) ice sheet.

          T    Thin till-- areas where till is generally less than 10-15 ft
               thick and including areas of bedrock outcrop where till is
               absent. Predominantly upper till; loose to moderately compact,
               generally sandy, commonly stony. Two facies are present in some
               places; a looser, coarser-grained ablation facies, melted out
               from supraglacial position; and a more compact finer-grained
               lodgement facies deposited subglacially. In general, both facies
               of upper till derived from the red Mesozoic sedimentary rocks of
               the central lowland of Connecticut are finer-grained, more
               compact, less stony and have fewer surface boulders than upper
               till derived from crystalline rocks of the eastern and western
               highlands.

          TT   Thick till-- areas where till is greater than 10-15 ft thick and
               including drumlins in which till thickness commonly exceeds 100
               ft (maximum recorded thickness is about 200 ft). Although upper
               till is the surface deposit, the lower till constitutes the bulk
               of the material in these areas. Lower till is moderately to very
               compact, and is commonly finer-grained and less stony than upper
               till. An oxidized zone, the lower part of a soil profile formed
               during a period of interglacial weathering, is generally present
               in the upper part of the lower till. This zone commonly shows
               closely-spaced joints that are stained with iron and manganese
               oxides.

          TS   End moraine deposits-- Composed predominantly of ablation facies
               sandy upper till; lenses of stratified sand and gravel occur
               locally within the till. Surface boulders on end moraine deposits
               are generally more numerous than on adjacent till surfaces; dense
               concentrations of boulders are present in some places. Deposits
               occur as free-standing hummocky landforms, commonly in elongate
               ridges that trend NNE - SSW, and range in thickness from 10 to 60
               ft.

                           GLACIAL MELTWATER DEPOSITS

     Glacial meltwater deposits (stratified deposits) consist of layers of
     well-sorted to poorly sorted gravel, sand, silt, and clay laid down by
     flowing meltwater in glacial lakes and streams which occupied the valleys
     and lowlands of Connecticut during retreat of the last ice sheet. Textural
     variations within the meltwater deposits occur both areally and vertically
     because meltwater-flow regimes were different in glaciofluvial (stream),
     glaciodeltaic (where a stream entered a lake), and glaciolacustrine (lake
     bottom) depositional environments. Grain-size variations also resulted from
     meltwater deposition in positions either proximal to or distal from the
     retreating glacier margin, which was the principal sediment source. A
     common depositional scenario contained a proximal, ice-marginal meltwater
     stream in which horizontally bedded glaciofluvial gravel and/or sand and
     gravel were laid down; farther down valley, the stream entered a glacial
     lake where glaciodeltaic sediments were deposited consisting of
     horizontally layered sand and gravel delta-topset beds overlying inclined
     layers of sand in delta-foreset beds. Farther out in the glacial lake,
     glaciolacustrine very fine sand, silt, and clay settled out on the lake
     bottom in flat-lying, thinly bedded layers. Mappable textural variations
     are present in the vertical section of meltwater deposits in many places.
     This stacking of textural units commonly resulted from locally changing
     conditions of meltwater deposition. For example, glacial lakes drained upon
     ice retreat from particular positions. This may have been followed locally
     by distal glaciofluvial (stream) deposition from ice positions farther up
     valley. The resulting vertical section shows meltwater terrace sediments
     consisting of horizontally bedded fluvial sand and gravel which overlie
     lake-bottom sediments of very fine sand, silt and clay (shown as unit SG/F
     on the map). In other places glaciodeltaic deposition over an extended
     period of time in a particular glacial lake caused deltaic deposits (sand
     and gravel topset beds over sand foreset beds, unit SG/S) to prograde
     farther out into the lake and to overlie lake-bottom sediments; such
     deposits are shown as stack unit SG/S/F on the map.

     Meltwater deposits are shown on this map as four basic units: gravel, sand
     and gravel, sand, and fines. Grain-size terminology used to define the
     textural range within these units is modified from Wentworth, 1922. Stack
     units are also shown; these are combinations of the four basic units in
     various orders of superposition. The map units described below show the
     texture of meltwater deposits through the total vertical section to the
     extent that it is known or can be reasonably inferred. In some places only
     one textural unit (such as unit SG) describes the entire vertical thickness
     of the meltwater deposits. In other places stack units (such as units
     SG/S/F or S/F) indicate changes of textural units in the subsurface. Common
     depositional environments for each textural unit are given in parentheses
     after each unit description.

                                 Fine Deposits

          F              Fines (very fine sand, silt, and clay)-- Composed of
                    well-sorted, thin layers of alternating silt and clay, or
                    thicker layers of very fine sand and silt. Very fine sand
                    commonly occurs at the surface and grades downward into
                    rhythmically bedded silt and clay varves (lake-bottom
                    deposits)

                                Coarse Deposits

          G              Gravel-- Composed mainly of gravel-sized particles;
                    cobbles and boulders predominate; minor amounts of sand
                    within gravel beds, and sand comprises few separate layers.
                    Gravel layers generally are poorly sorted and bedding
                    commonly is distorted and faulted due to postdepositional
                    collapse related to melting of ice. Gravel deposits are
                    shown only where observed in the field; additional gravel
                    deposits may be expected, principally in areas mapped as
                    unit sg (proximal fluvial deposits or delta-topset beds)

          SG             Sand and gravel-- Composed of mixtures of gravel and
                    sand within individual layers and as alternating layers.
                    Sand and gravel layers generally range from 25 to 50 percent
                    gravel particles and from 50 to 75 percent sand particles.
                    Layers are well to poorly sorted; bedding may be distorted
                    and faulted due to postdepositional collapse. It is likely
                    that some deposits within this map unit actually are gravel
                    or sand and gravel overlying sand. It is less likely that
                    some of these deposits are sand (fluvial deposits or
                    delta-topset beds)

          S              Sand-- Composed mainly of very coarse to fine sand,
                    commonly in well-sorted layers. Coarser layers may contain
                    up to 25 percent gravel particles, generally granules and
                    pebbles; finer layers may contain some very fine sand, silt,
                    and clay (delta-foreset beds, very distal fluvial deposits,
                    or windblown sediment)

                            Stacked Coarse Deposits

          G/SG           Gravel overlying sand and gravel-- Gravel is generally
                    less than 20 ft thick, horizontally bedded, and overlies
                    thicker, inclined layers of sand and gravel (proximal
                    deltaic deposits)

          G/S            Gravel overlying sand-- Gravel is generally less than
                    20 ft thick, horizontally bedded, and overlies thicker,
                    inclined layers of sand (proximal deltaic deposits)

          SG/S           Sand and gravel overlying sand-- Sand and gravel is
                    generally less that 20 ft thick, horizontally bedded, and
                    overlies thicker, inclined layers of sand (deltaic deposits)

          SG/S/SG   Sand and gravel overlying sand overlying sand and gravel--
                    Sand and gravel is generally less than 20 ft thick,
                    horizontally bedded, and overlies thicker inclined layers of
                    sand; thickness of sand and gravel at the base of the
                    section is variable (deltaic deposits overlying slightly
                    older, more proximal deposits)

          S/G            Sand overlying gravel-- Sand of variable thickness
                    overlies gravel of variable thickness (younger distal
                    deltaic or fluvial sediments overlying older, more proximal
                    fluvial or deltaic sediments)

          S/SG           Sand overlying sand and gravel-- Sand of variable
                    thickness overlies sand and gravel of variable thickness
                    (distal deltaic or fluvial sediments overlying slightly
                    older proximal fluvialor deltaic sediments)

                 Stacked Coarse Deposits Overlying Fine Deposits

          G/S/F     Gravel overlying sand overlying fines-- Gravel is generally
                    less than 20 ft thick, horizontally bedded and overlies
                    thicker inclined beds of sand which in turn overlie fines of
                    variable thickness (proximal deltaic deposits overlying
                    lake-bottom sediments)

          G/F            Gravel overlying fines-- Gravel is generally less than
                    20 ft thick, horizontally bedded and overlies thicker thinly
                    bedded fines (proximal fluvial deposits overlying
                    lake-bottom sediments)

          SG/S/F    Sand and gravel overlying sand overlying fines-- Sand and
                    gravel is generally less than 20 ft thick, horizontally
                    bedded and overlies thicker inclined beds of sand which in
                    turn overlie thinly bedded fines of variable thickness
                    (deltaic deposits overlying lake-bottom sediment)

          SG/F           Sand and gravel overlying fines-- Sand and gravel is
                    generally less than 20 ft thick, horizontally bedded and
                    overlies thicker thinly bedded fines (fluvial meltwater
                    terrace deposits overlying lake-bottom sediment)

          S/F            Sand overlying fines-- Sand is of variable thickness,
                    commonly in inclined foreset beds and overlies thinly bedded
                    fines of variable thickness (distal deltaic deposits
                    overlying lake-bottom sediment)

                 Stacked Fine Deposits Overlying Coarse Deposits

          F/SG           Fines overlying sand and gravel-- Fines of variable
                    thickness, commonly in thinly bedded layers overlie sand and
                    gravel of ariable thickness (lake-bottom deposits overlying
                    slightly older collapsed proximal fluvial or deltaic
                    deposits); in a few places sand or sand and gravel,
                    generally less than 25 ft thick occurs on top of the f/sg
                    unit and is indicated as s/f/sg and sg/f/sg on the map,
                    respectively

          F/S            Fines overlying sand-- Fines of variable thickness,
                    commonly in thinly bedded layers overlie sand of variable
                    thickness (distal lake-bottom deposits overlying slightly
                    older more delta-proximal lacustrine sediment)

                              POSTGLACIAL DEPOSITS

          A              Floodplain alluvium-- Sand, gravel, silt, and some
                    organic material, on the floodplains of modern streams. The
                    texture of alluvium commonly varies over short distances
                    both laterally and vertically, and is often similar to the
                    texture of adjacent glacial deposits. Along smaller streams,
                    alluvium is commonly less than 5 ft thick. The most
                    extensive deposit of alluvium on the map is along the
                    Connecticut River where the texture is predominantly fine to
                    very fine sand and silt; here and along other larger rivers,
                    it may be as much as 25 ft thick. Alluvium typically
                    overlies thicker glacial stratified deposits, the general
                    texture of which is indicated by the stacked unit.

          A/SG           Alluvium overlying undifferentiated coarse deposits

          A/S            Alluvium overlying sand

          A/F            Alluvium overlying fines

          A/SG/F    Alluvium overlying undifferentiated coarse deposits
                    overlying fine deposits

          A/S/F     Alluvium overlying sand overlying fines

          A/F/SG    Alluvium overlying undifferentiated fine deposits overlying
                    coarse deposits

          A/F/S     Alluvium overlying fines overlying sand

          SW             Swamp deposits-- Muck and peat that contain minor
                    amounts of sand, silt, and clay, accumulated in poorly
                    drained areas. Most swamp deposits are less than about 10 ft
                    thick. Swamp deposits are underlain by glacial deposits or
                    bedrock. They are often underlain by glacial till even where
                    they occur within glacial meltwater deposits. Where swamp
                    deposits are known or inferred to be underlain by sand
                    and/or fines, they are shown on the map by the stacked unit.

          SW/SG     Swamp deposits overlying undifferentiated coarse deposits

          SW/S           Swamp deposits overlying sand

          SW/F           Swamp deposits overlying fines

          SW/S/SG   Swamp deposits overlying sand overlying undifferentiated
                    coarse deposits

          SW/S/F    Swamp deposits overlying sand overlying fines

          SW/F/S    Swamp deposits overlying fines overlying sand

          SM             Salt-marsh and tidal-marsh deposits-- Peat and muck
                    interbedded with sand and silt, deposited in environments of
                    low wave energy along the coast and in river estuaries.
                    Marsh deposits are dominantly peat and muck, generally a few
                    feet to 35 ft thick. In the major estuaries marsh deposits
                    may overlie estuarine deposits which are sand and silt with
                    minor organic material as much as 40 - 90 ft thick. These
                    deposits are generally underlain by the glacial material
                    shown adjacent on the map; either till or sand and gravel.
                    Where they are known or inferred to be underlain by sand or
                    fines, they are shown on the map by stacked units.

          SM/S           Salt-marsh and tidal-marsh deposits overlying sand

          SM/F           Salt-marsh and tidal-marsh deposits overlying fines

          SM/S/F    Salt-marsh and tidal-marsh deposits overlying sand overlying
                    fines

          TA             Talus-- Loose, angular blocks (mostly boulders)
                    accumulated by rockfall at the bases of steep bedrock
                    cliffs. Talus forms steep unstable slopes and is generally
                    less than 10 ft thick. It occurs most extensively along the
                    linear basalt and diabase ridges within the central lowland.

          B              Beach deposits-- Sand and and gravel deposited along
                    the shoreline by waves and currents and by wind action. The
                    texture of beach deposits varies over short distances and is
                    generally controlled by the texture of nearby glacial
                    materials exposed to wave action. Beach deposits are
                    generally well sorted and rarely more than a few feet thick.
                    Many sand beaches along the Connecticut coast have been
                    "restored"; these have not been distinguished from natural
                    beaches on this map; however, extensive beaches that consist
                    totally of "made-land" are mapped as artificial fill.

          AF             Artificial fill-- Earth materials and manmade materials
                    that have been artificially emplaced. Artificial fill is
                    common throughout the map area but has been shown on this
                    map only where extensive areas of "made land" occur,
                    principally along the coast.

Revisions made to data:

     Version 1 -Original version compiled in 1994.

     Version 2 (1999) - SURFMAT was transformed from the Connecticut State Plane
     Coordinate System of 1927 (NAD27) to the Connecticut State Plane Coordinate
     System of 1983 (NAD83).

Reviews applied to data:

     Conforms with DEP-GIS Spatial Data Standards.  Standards for feature
     accuracy are: 90 percent of the digitized features are within .01 inch of
     the centerline of that feature on the manuscript (original map); 100
     percent of all features must be within .02 inch. There are NO duplicate
     features, unresolved intersections, overshooting arcs, open polygons,
     sliver polygons, or unlabeled polygons. Fuzzy and Dangle Tolerances were
     verified and set in the TOL file, and the map projection is defined in the
     PRJ file.  Feature IDs in the statewide coverage are unique.

     Conforms with DEP-GIS Database Design Standards.  Item names are all in
     upper case, do not include any special characters except an underscore (_),
     and are no more than 10 characters long.  Code tables provide code
     descriptions for Items with a _COD, _NO, or _ID extension in their name,
     and relate Files (.REL) provide relational access to these tables.
     Standard symbology is defined for ARC/INFO (lineset and shadeset files) and
     ArcView (legend file).  All character attribute values are in upper case.

     Related spatial and tabular data sets and programs -

          INFO Table     Description
          -------------  ------------------------------

          SMARC.COD      Surficial Materials Arc Code Table
          SMPOLY.COD     Surficial Materials Poly Code Table


          ARC/INFO Symbology  Symbolset      Code Table     Item for 1:24,000
                              File           w/ Symbology   Scale Symbology
          -----------------   ------------   ------------   ------------------

          Polygons:           SMPOLY.SHD     SMPOLY.COD     SMP0LY024

          (Note: SMPOLY.COD includes shade codes for scale specific symbology:
          SMPOLY012 - SMPOLY500)

          ARCVIEW Symbology   Symbol Item    Legend File
          -----------------   -------------  -------------

          Polygons:           AV_LEGEND      SURFMAT.AVL

References cited:

     Stone, J.R., Schafer, J.P., London, E.H. and Thompson, W.B., 1992,
     Surficial Materials Map of Connecticut: U.S. Geological Survey Special Map,
     2 sheets, scale 1:125,000.

Use Restrictions:

     The geologic contacts are considered accurate as mapped at 1:24,000 scale.
     While it may be desirable to represent the geology at a larger scale for
     site-specific applications, keep in mind that 1:24,000 scale accuracy may
     not be appropriate for such uses.

     Not recommended for use with other data layers having source map scales
     greater than 1:24,000 (1 inch = 2000 feet).

Attribute Tables

--------------------------------------------------------------------------------
SURFMAT Arc Attributes (SURFMAT.AAT)

Surficial Material contacts (boundaries separating surficial material units)

COL ITEM             WDTH OPUT T DEC  NAME                            CODE TABLE
--- ---------------- ---- ---- - -- ------------------------------ -------------

  1 FNODE#              4    5 B  0 From Node                                  -
  5 TNODE#              4    5 B  0 To Node                                    -
  9 LPOLY#              4    5 B  0 Left Polygon Number                        -
 13 RPOLY#              4    5 B  0 Right Polygon Number                       -
 17 LENGTH              4   12 F  3 Arc Length                                 -
 21 SURFMAT#            4    5 B  0 Internal Feature Number                    -
 25 SURFMAT-ID          4    5 B  0 User-assigned Feature Number               -
 29 SMARC_CD            1    1 I  0 Surficial Materials Arc Code       SMARC.COD
** REDEFINED ITEMS **
 29 DXF-LAYER           1    1 C  0 DXF-LAYER Classification                   -


--------------------------------------------------------------------------------
SURFMAT Poly Attributes (SURFMAT.PAT)

Surficial Material polygon attributes

COL ITEM             WDTH OPUT T DEC  NAME                            CODE TABLE
--- ---------------- ---- ---- - -- ------------------------------ -------------

  1 AREA                4   12 F  3 Polygon/Region Area                        -
  5 PERIMETER           4   12 F  3 Polygon/Region Perimeter                   -
  9 SURFMAT#            4    5 B  0 Internal Feature Number                    -
 13 SURFMAT-ID          4    5 B  0 User-assigned Feature Number               -
 17 AV_LEGEND          30   30 C  0 ArcView Legend Symbology Item              -
 47 SMPOLY_CD           8    8 C  0 Surficial Materials Poly Code     SMPOLY.COD
 55 ACREAGE             4   12 F  3 Polygon Acreage                            -
 59 AREA_SQMI           4   12 F  5 Polygon Square Miles                       -
** REDEFINED ITEMS **
 47 DXF-LAYER           8    8 C  0 DXF-LAYER Classification                   -


--------------------------------------------------------------------------------
Code Tables for Surficial Materials
--------------------------------------------------------------------------------


SMARC.COD         DATABASE: SURFMAT

           SMARC_CD DESCRIPTION

                  0 USGS 7.5 MINUTE QUADRANGLE BOUNDARY
                  1 SURFICIAL MATERIAL CONTACT
                  2 HYDROGRAPHY SHORELINE
                  3 NOT A SURFICIAL MATERIAL CONTACT

SMPOLY.COD        DATABASE: SURFMAT

          SMPOLY_CD DESCRIPTION

                  - -
                  A ALLUVIUM
                A/F ALLUVIUM OVERLYING FINES
              A/F/G ALLUVIUM OVERLYING FINES OVERLYING GRAVEL
              A/F/S ALLUVIUM OVERLYING FINES OVERLYING SAND
             A/F/SG ALLUVIUM OVERLYING FINES OVERLYING SAND AND GRAVEL
                A/S ALLUVIUM OVERLYING SAND
              A/S/F ALLUVIUM OVERLYING SAND OVERLYING FINES
             A/S/SG ALLUVIUM OVERLYING SAND OVERLYING SAND AND GRAVEL
               A/SG ALLUVIUM OVERLYING SAND AND GRAVEL
             A/SG/F ALLUVIUM OVERLYING SAND AND GRAVEL OVERLYING FINES
             A/SG/S ALLUVIUM OVERLYING SAND AND GRAVEL OVERLYING SAND
           A/SG/S/F ALLUVIUM OVERLYING SAND AND GRAVEL OVERLYING SAND OVER FINES
                 AF ARTIFICIAL FILL
                  B BEACH
                  F FINES
                F/G FINES OVERLYING GRAVEL
                F/S FINES OVERLYING SAND
               F/SG FINES OVERLYING SAND AND GRAVEL
                  G GRAVEL
                G/F GRAVEL OVERLYING FINES
                G/S GRAVEL OVERLYING SAND
              G/S/F GRAVEL OVERLYING SAND OVERLYING FINES
               G/SG GRAVEL OVERLYING SAND AND GRAVEL
             G/SG/S GRAVEL OVERLYING SAND AND GRAVEL OVERLYING SAND
                  S SAND
                S/F SAND OVERLYING FINES
             S/F/SG SAND OVERLYING FINES OVERLYING SAND AND GRAVEL
                S/G SAND OVERLYING GRAVEL
               S/SG SAND OVERLYING SAND AND GRAVEL
                 SG SAND AND GRAVEL
               SG/F SAND AND GRAVEL OVERLYING FINES
            SG/F/SG SAND AND GRAVEL OVERLYING FINES OVERLYING SAND AND GRAVEL
               SG/S SAND AND GRAVEL OVERLYING SAND
             SG/S/F SAND AND GRAVEL OVERLYING SAND OVERLYING FINES
            SG/S/SG SAND AND GRAVEL OVERLYING SAND OVERLYING SAND AND GRAVEL
                 SM SALT MARSH AND ESTUARINE DEPOSITS
               SM/F SALT MARSH OVERLYING FINES
             SM/S/F SALT MARSH OVERLYING SAND OVERLYING FINES
                 SW SWAMP
               SW/F SWAMP OVERLYING FINES
             SW/F/S SWAMP OVERLYING FINES OVERLYING SAND
               SW/S SWAMP OVERLYING SAND
             SW/S/F SWAMP OVERLYING SAND OVERLYING FINES
            SW/S/SG SWAMP OVERLYING SAND OVERLYING SAND AND GRAVEL
              SW/SG SWAMP OVERLYING SAND AND GRAVEL
                  T TILL
                 TA TALUS
                 TS SANDY TILL, SAND AND GRAVEL SOME AREAS OF DENSE SURFACE BOULDERS
                 TT THICK TILL
                  W WATER

Field Attributes

--------------------------------------------------------------------------------
SURFMAT Arc Attributes (SURFMAT.AAT)

Surficial Material contacts (boundaries separating surficial material units)
--------------------------------------------------------------------------------


FNODE#           From Node                      CODE TABLE: -

Internal number of from-node
  DOMAIN:
Sequential unique positive integer
  SOURCE:
Computed
  ACCURACY:
No qualifications
--------------------------------------------------------------------------------

TNODE#           To Node                        CODE TABLE: -

Internal number of to-node
  DOMAIN:
Sequential unique positive integer
  SOURCE:
Computed
  ACCURACY:
No qualifications
--------------------------------------------------------------------------------

LPOLY#           Left Polygon Number            CODE TABLE: -

Internal number of poly to left of arc
  DOMAIN:
Sequential unique positive integer
  SOURCE:
Computed
  ACCURACY:
No qualifications
--------------------------------------------------------------------------------

RPOLY#           Right Polygon Number           CODE TABLE: -

Internal number of poly to right of arc
  DOMAIN:
Sequential unique positive integer
  SOURCE:
Computed
  ACCURACY:
No qualifications
--------------------------------------------------------------------------------

LENGTH           Arc Length                     CODE TABLE: -

Length of arc in coverage units
  DOMAIN:
Positive real numbers
  SOURCE:
Computed
  ACCURACY:
Valid for projection and fuzzy tolerance
  UNITS: Feet
--------------------------------------------------------------------------------

SURFMAT#         Internal Feature Number        CODE TABLE: -

Internal Feature Number
  DOMAIN:
Sequential unique positive integer
  SOURCE:
Computed
  ACCURACY:
No qualifications
--------------------------------------------------------------------------------

SURFMAT-ID       User-assigned Feature Number   CODE TABLE: -

User-assigned Feature Number
  DOMAIN:
Integer
  SOURCE:
User-defined
--------------------------------------------------------------------------------

SMARC_CD         Surficial Materials Arc Code   CODE TABLE: SMARC.COD

Describes the type of boundary separating Surficial Material units
  DOMAIN:
??
  SOURCE:
??
  ACCURACY:
??
--------------------------------------------------------------------------------

DXF-LAYER        DXF-LAYER Classification       CODE TABLE: -

Classifies features for conversion to Drawing Exchange File (DXF) format
--------------------------------------------------------------------------------



--------------------------------------------------------------------------------
SURFMAT Poly Attributes (SURFMAT.PAT)

Surficial Material polygon attributes
--------------------------------------------------------------------------------


AREA             Polygon/Region Area            CODE TABLE: -

Area of poly/region in square coverage units
  DOMAIN:
Positive real numbers
  SOURCE:
Computed
  ACCURACY:
ONLY valid for equal-area projection
  UNITS: Square Feet
--------------------------------------------------------------------------------

PERIMETER        Polygon/Region Perimeter       CODE TABLE: -

Perimeter of poly/region in coverage units
  DOMAIN:
Positive real numbers
  SOURCE:
Computed
  ACCURACY:
Valid for projection & fuzzy tolerance
  UNITS: Feet
--------------------------------------------------------------------------------

SURFMAT#         Internal Feature Number        CODE TABLE: -

Internal Feature Number
  DOMAIN:
Sequential unique positive integer
  SOURCE:
Computed
  ACCURACY:
No qualifications
--------------------------------------------------------------------------------

SURFMAT-ID       User-assigned Feature Number   CODE TABLE: -

User-assigned Feature Number
  DOMAIN:
Integer
  SOURCE:
User-defined
--------------------------------------------------------------------------------

AV_LEGEND        ArcView Legend Symbology Item  CODE TABLE: -

A simple classification specifically designed for symbolizing in ArcView
  SOURCE:
Classification and symbology developed by Natural Resources Center, DEP
--------------------------------------------------------------------------------

SMPOLY_CD        Surficial Materials Poly Code  CODE TABLE: SMPOLY.COD

Describes the type of surficial materials (both single and stacked units)
  DOMAIN:
See SMPOLY.COD code table.
  SOURCE:
??
  ACCURACY:
??
--------------------------------------------------------------------------------

ACREAGE          Polygon Acreage                CODE TABLE: -

Area of polygon in acres
  DOMAIN:
Positive number
  SOURCE:
Computed from AREA Item ( AREA feet / 43560 )
  UNITS: Acres
--------------------------------------------------------------------------------

AREA_SQMI        Polygon Square Miles           CODE TABLE: -

Area of polygon in Square miles
  DOMAIN:
Positive real numbers
  SOURCE:
Computed from AREA Item ( AREA feet / 27878400 )
  UNITS: Square Miles
--------------------------------------------------------------------------------

DXF-LAYER        DXF-LAYER Classification       CODE TABLE: -

Classifies features for conversion to Drawing Exchange File (DXF) format
--------------------------------------------------------------------------------